Plasma cleaning machine CD-500

Is a low temperature and high efficiency on-line plasma processing equipment, direct injection nozzle makes the output plasma uniform, lower temperature; Can replace the high energy consumption, high pollution of traditional surface treatment technology (flame, chemical solvent corrosion, spray primer)

Weight: 13kg

Color: Yellow/black

Input power: 100-240VAC/10A

Standby power consumption: < 50W

Setting screen: Key + key lock/touch screen + password

Power adjustment range: 10-100%

Controller back-end serial port: pedal, single-chip microcomputer, PLC, RS232/RS485/TCP

Standard number of guns: 1PCS

Gas pressure: 0.2-0.4mPa

Working air inlet Connector: 6mm Connector

Dimensions (width * length * height): L380*W170*H220 mm

Cooling gas usage: Nz: 50 6L/min CDA:56 6L/min

Working gas usage: N2: 40 soil 6L/min CDA: 46 soil 6L/min

Plasma effective diameter: 2-10mm /60-100mm (depending on conditions and sample)

Plasma output power: 400-500W 800W-1000W (ground resistance <0.5 ohms)

Power supply: AC220V/5A, 50-60Hz, single-phase AC + ground cable, power consumption 500W/1000W

Configuration space: Store in a well-ventilated place with an ambient temperature of less than 30 degrees Celsius. Reserve the space with more than 150mm heat dissipation on the left and right side, and reserve the 150mm line space behind

Controller functions Option functions enable:

1. Plasma grab does not work alarm

2. Display gun power value in real time

3. Size customization

4. Real-time air pressure monitoring

Product advantages:

1. Intelligent control

1.1 Digital control of pressure and power

1.2 The strength can be set and controlled

2. Real-time monitoring

2.1 Air pressure, power real-time monitoring display

2.2 Both upper and lower thresholds can be set for alarm

2.3 Component damage alarm

2.4 Real-time monitoring of components

3. Multiple patterns

3.1 Manual/Automatic mode can be switched at will

3.2 You can add delay parameters

4. Information management

4.1 Optional IO and MES systems

4.2 Real-time Information Upload Status

5. Easy to operate

5.145° inclination for easy observation

5.2 Full-Screen Touch Operation

Direct injection plasma gun specifications

Weight: <0.8kg

Processing width: 2-6mm

Working gas: compressed air /N2

Size (H) : 42mmX 215mm

Processing speed (depending on material): 50/min

Effective processing distance from nozzle to workpiece surface: 8-15mm